INN Configuration File Syntax

This file documents the standardized syntax for INN configuration files. This is the syntax that the parsing code in libinn will understand and the syntax towards which all configuration files should move.

The basic structure of a configuration file is a tree of groups. Each group has a type and an optional tag, and may contain zero or more parameter settings, an association of a name with a value. All parameter names and group types are simple case-sensitive strings composed of printable ASCII characters and not containing whitespace or any of the characters "\:;{}[]<>" or the double-quote. A group may contain another group (and in fact the top level of the file can be thought of as a top-level group that isn't allowed to contain parameter settings).

Supported parameter values are booleans, integers, real numbers, strings, and lists of strings.

The basic syntax looks like:

    group-type tag {
        parameter: value
        parameter: [ string string ... ]
        # ...
        group-type tag {
            # ...

Tags are strings, with the same syntax as a string value for a parameter; they are optional and may be omitted. A tag can be thought of as the name of a particular group, whereas the <group-type> says what that group is intended to specify and there may be many groups with the same type.

The second parameter example above has as its value a list. The square brackets are part of the syntax of the configuration file; lists are enclosed in square brackets and the elements are space-separated.

As seen above, groups may be nested.

Multiple occurrences of the same parameter in the parameter section of a group is an error. In practice, the second parameter will take precedent, but an error will be reported when such a configuration file is parsed.

Parameter values inherit. In other words, the structure:

    first {
        first-parameter: 1
        second {
            second-parameter: 1
            third { third-parameter: 1 }
        another "tag" { }

is parsed into a tree that looks like:

    +-------+   +--------+   +-------+
    | first |-+-| second |---| third |
    +-------+ | +--------+   +-------+
              | +---------+
              +-| another |

where each box is a group. The type of the group is given in the box; none of these groups have tags except for the only group of type "another", which has the tag "tag". The group of type "third" has three parameters set, namely "third-parameter" (set in the group itself), "second-parameter" (inherited from the group of type "second"), and "first-parameter" (inherited from "first" by "second" and then from "second" by "third").

The practical meaning of this is that enclosing groups can be used to set default values for a set of subgroups. For example, consider the following configuration that defines three peers of a news server and newsgroups they're allowed to send:

    peer { newsgroups: * }
    peer { newsgroups: * }
    peer { newsgroups: * }

This could instead be written as:

    group {
        newsgroups: *
        peer { }
        peer { }
        peer { }

or as:

    peer {
        newsgroups: *
        peer { }
        peer { }

and for a client program that only cares about the defined list of peers, these three structures would be entirely equivalent; all questions about what parameters are defined in the peer groups would have identical answers either way this configuration was written.

Note that the second form above is preferred as a matter of style to the third, since otherwise it's tempting to derive some significance from the nesting structure of the peer groups. Also note that in the second example above, the enclosing group must have a type other than "peer"; to see why, consider the program that asks the configuration parser for a list of all defined peer groups and uses the resulting list to build some internal data structures. If the enclosing group in the second example above had been of type peer, there would be four peer groups instead of three and one of them wouldn't have a tag, probably provoking an error message.

Boolean values may be given as yes, true, or on, or as no, false, or off. Integers must be between -2,147,483,648 and +2,147,483,647 inclusive (the same as the minimums for a C99 signed long). Floating point numbers must be between 0 and 1e37 in absolute magnitude (the same as the minimums for a C99 double) and can safely expect eight digits of precision.

Strings are optionally enclosed in double quotes, and must be quoted if they contain any whitespace, double-quote, or any characters in the set "\:;[]{}<>". Escape sequences in strings (sequences beginning with \) are parsed the same as they are in C. Strings can be continued on multiple lines by ending each line in a backslash, and the newline is not considered part of such a continued string (to embed a literal newline in a string, use \n).

Lists of strings are delimited by [] and consist of whitespace-separated strings, which must follow the same quoting rules as all other strings. Group tags are also strings and follow the same quoting rules.

There are two more bits of syntax. Normally, parameters must be separated by newlines, but for convenience it's possible to put multiple parameters on the same line separated by semicolons:

    parameter: value; parameter: value

Finally, the body of a group may be defined in a separate file. To do this, rather than writing the body of the group enclosed in {}, instead give the file name in <>:

    group tag <filename>

(The filename is also a string and may be double-quoted if necessary, but since file names rarely contain any of the excluded characters it's rarely necessary.)

Here is the (almost) complete ABNF for the configuration file syntax. The syntax is per RFC 2234.

First the basic syntax elements and possible parameter values:

    newline             = %d13 / %d10 / %d13.10
                                ; Any of CR, LF, or CRLF are interpreted
                                ; as a newline.
    comment             = *WSP "#" *(WSP / VCHAR / %x8A-FF) newline
    WHITE               = WSP / newline [comment]
    boolean             = "yes" / "on" / "true" / "no" / "off" / "false"
    integer             = ["-"] 1*DIGIT
    real-number         = ["-"] 1*DIGIT "." 1*DIGIT [ "e" ["-"] 1*DIGIT ]
    non-special         = %x21 / %x23-39 / %x3D / %x3F-5A / %x5E-7A
                               / %x7C / %x7E / %x8A-FF
                                ; All VCHAR except "\:;<>[]{}
    quoted-string       = DQUOTE 1*(WSP / VCHAR / %x8A-FF) DQUOTE
                                ; DQUOTE within the quoted string must be
                                ; written as 0x5C.22 (\"), and backslash
                                ; sequences are interpreted as in C
                                ; strings.
    string              = 1*non-special / quoted-string
    list-body           = string *( 1*WHITE string )
    list                = "[" *WHITE [ list-body ] *WHITE "]"

Now the general structure:

    parameter-name      = 1*non-special
    parameter-value     = boolean / integer / real-number / string / list
    parameter           = parameter-name ":" 1*WSP parameter-value
    parameter-list      = parameter [ *WHITE (";" / newline) *WHITE parameter ]
    group-list          = group *( *WHITE group )
    group-body          = parameter-list [ *WHITE newline *WHITE group-list ]
                        / group-list
    group-file          = string
    group-contents      = "{" *WHITE [ group-body ] *WHITE "}"
                        / "<" group-file ">"
    group-type          = 1*non-special
    group-tag           = string
    group-name          = group-type [ 1*WHITE group-tag ]
    group               = group-name 1*WHITE group-contents
    file                = *WHITE *( group *WHITE )

One implication of this grammar is that any line outside a quoted string that begins with "#", optionally preceded by whitespace, is regarded as a comment and discarded. The line must begin with "#" (and optional whitespace); comments at the end of lines aren't permitted. "#" has no special significance in quoted strings, even if it's at the beginning of a line. Note that comments cannot be continued to the next line in any way; each comment line must begin with "#".

It's unclear the best thing to do with high-bit characters (both literal characters with value > 0x7F in a configuration file and characters with such values created in quoted strings with \<octal>, \x, \u, or \U). In the long term, INN should move towards assuming UTF-8 everywhere, as this is the direction that all of the news standards are heading, but in the interim various non-Unicode character sets are in widespread use and there must be some way of encoding those values in INN configuration files (so that things like the default Organization header value can be set appropriately).

As a compromise, the configuration parser will pass unaltered any literal characters with value > 0x7F to the calling application, and \<octal> and \x escapes will generate eight-bit characters in the strings (and therefore cannot be used to generate UTF-8 strings containing code points greater than U+007F). \u and \U, in contrast, will generate characters encoded in UTF-8.

Converted to XHTML by faq2html version 1.36